Documentation for Self-Declaration

ISO/IEC 17025

ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories is the main ISO standard used by testing and calibration laboratories.

Laboratories use ISO/IEC 17025 to implement a quality system aimed at improving their ability to consistently produce valid results. It is also the basis for accreditation from an accreditation body. Since the standard is about competence, accreditation is simply formal recognition of a demonstration of that competence. A prerequisite for a laboratory to become accredited is to have a documented quality management system. The usual contents of the quality manual follow the outline of the ISO/IEC 17025 standard.

ISO/IEC 17025:2005 is for use by laboratories in developing their management system for quality, administrative and technical operations. Laboratory customers, regulatory authorities and accreditation bodies may also use it in confirming or recognizing the competence of laboratories. ISO/IEC 17025:2005 is not intended to be used as the basis for certification of laboratories.Compliance with regulatory and safety requirements on the operation of laboratories is not covered by ISO/IEC 17025:2005.

 ISO/TS 29001:2010

Petroleum, petrochemical and natural gas industries -- Sector-specific quality management systems -- Requirements for product and service supply organizations

ISO/TS 29001:2010 defines the quality management system for product and service supply organizations for the petroleum, petrochemical and natural gas industries.Boxed text is original ISO 9001:2008 text unaltered and in its entirety. The petroleum, petrochemical, and natural gas industry sector-specific supplemental requirements are outside the boxes.

 The difference between the CE logo and alleged "China Export" mark.

 Declaration Introduction of CE Marking:

European Conformity (EC) we provides Certificate of Compliance of requirement relating to Declaration CE marking (European Conformities) after successful completion of Assessment Audit by independent Notified Auditor. Declaration Declaration CE marking on a product ensures that the product conforms to the essential requirements of the applicable EC directives. Legally, the Declaration CE marking is no quality mark like ISO or ISI. But depending on the applicable directive the Declaration CE marking factually it help and may be considered as a quality mark.

Note: our company is not a member of Nando, But we can certify compliance with the EC  Declaration method.You can download the EC New Approach Directives guidance  from the  Europa website.

 :We are  cooperate with Notification  Bodis For product testing  Such as

 EDF          GDF           

How to place a Declaration CE marking on a product

The process you follow depends on the directives that apply to your product.

1. Identify the directive(s) and harmonised standards applicable to the product

2. Check the product-specific requirements

3. Identify whether an independent conformity assessment is required from a Notified Body

4. Test the product and check its conformity

5. Draw up and keep available the required technical documentation

6. Placing the CE marking on your product and EC Declaration of ConformityThe manufacturer’s Declaration of Conformity

The  list of these product categories is below that we can certify compliance with the EC Declaration method:

 Appliances burning gaseous fuels 

Gas appliances (GAD)

Directive 2009/142/ECof the European Parliament and of the Council of 30 November 2009 relating to appliances burning gaseous fuels (codified version) 
OJ L 330 of 16 December 2009

ex-Council Directive of 29 June 1990 on the approximation of the laws of the Member States relating to appliances burning gaseous fuels OJ L 196 of 26 July 1990

 

Cableway installations designed to carry persons 

Cableway installations

European Parliament and Council Directive 2000/9/EC relating to cableway installations designed to carry passengers
OJ L 106, 3 May 2000


Electromagnetic compatibility

 

The main objective of the Directive 2004/108/EC  of the European Parliament and of the Council, of 15 December 2004, on the approximation of the Laws of Member States relating to electromagnetic compatibility (EMC) is thus to regulate the compatibility of equipment regarding EMC:

Equipment and protective systems intended for

use in potentially explosive atmospheres

The Equipment and Protective systems intended for use in Potentially Explosive Atmospheres (ATEX) Directive 94/9/EC provides the technical requirements to be applied and the relevant conformity assessment procedures before placing this equipment on the European market.

Hot-water boilers

 

Council Directive 92/42/EEC of 21 May 1992 on efficiency requirements for new hot-water boilers fired with liquid or gaseous fuels 

Household refrigerators and freezers

  

The directive is one of a series of measures introduced by The European Commission under their programme of consumer and environmental protection. The overall programme goes under the title 'Specific Actions for Vigorous Energy Efficiency (SAVE)' The original framework for this programme is set out under Council Directive 91/565/EEC. Other measures include the Hot Water Boiler Efficiency Directive, Directive 93/76/EEC which requires member states to introduce other measures intended to limit carbon dioxide emissions, and the Energy Labelling Directive 92/75/EEC. 

low voltage

The Low Voltage Directive (LVD) 2006/95/EC  is one of the oldest Single Market Directives adopted before the "New" or "Global" Approach. However, it does characterise both with a conformity assessment procedure applied to equipment before placing on the Market and with Essential Health and Safety Requirements (EHSRs) which such equipment must meet either directly or by means of harmonised standards.

Machinery

 

The revised Machinery Directive 2006/42/EC does not introduce any radical changes compared with the oldMachinery Directive 98/37/EC but aims at consolidating the achievements of the Machinery Directive in terms of free circulation and safety of machinery while improving its application.

Measuring instruments

  

Directive 2004/22/EC of the European Parliament and of the Council of 31 March 2004 on measuring instruments.

Non-automatic weighing instruments

 

Directive 2009/23/EC of the European Parliament and of the Council of 23 April 2009 on non-automatic weighing instruments (codified version)
OJ L 122, 16 May 2009 

Pressure equipment

Directive 97/23/ECof the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
OJ L 181 of 9 July 1997

 Radio and telecommunications terminal equipment

 

Directive of 9 March 1999of the European Parliament and of the Council on Radio Equipment and Telecommunications Terminal Equipment and the mutual recognition of their conformity
OJ L 91 of 7 April 1999 .

Directive 98/13/EC is repealed by Directive 1999/5/EC as from 8 April 2000.

Safety of Toys

 

Directive 2009/48/ECof the European Parliament and of the Council of 18 June 2009 on the safety of toys .-OJ L 170, 30 June 2009

Council Directive 88/378/EEC of 3 May 1988 on the approximation of the laws of the Member States concerning the safety of toys
OJ L 187 of 6 July 1988
Directive 88/378/EEC, except Article 2(1) and Part 3 of Annex II, is repealed with effect from 20 July 2011. Article 2(1) thereof and Part 3 of Annex II thereto are repealed with effect from 20 July 2013.

Simple pressure vessels

Directive 2009/105/ECof the European Parliament and of the Council of 16 September 2009 relating to simple pressure vessels (codified version) 
OJ L 264 of 8 October 2009

(ex- Council Directive 87/404/EEC of 25 June 1987 on the harmonization of the laws of the Member States relating to simple pressure vessels - OJ No L 220 of 8 August 1987)

The CE marking is not required for items, for example:

 chemicals- pharmaceuticals-cosmetics and foodstuffs

 If you have an enquiry about the Construction Products Regulations or if you would like information on the new requirements for structural steel, you can email with us and Visit to website: www.ce-marking.org

 

JoomShaper